Gummed Materials for Membranes
Gummed material with special treatment anti-wiredrawn
|
Gummed material in Neoprene + insert Nylon Temperature of use from -30°C to + 100°C Good for Alcohol, acids, soda, compressed air. Use on hydraulic and pneumatic valves, pumps of void for braking systems. Thicknesses from 1,10 mm up to mm 2,5 Hardness 60 Shore |
|
Gummed fabrics in EPDM+ insert Poliarillamide
Use at a temperature from -40°C to +140°C Good for liquid brakes, water, Alcohol, vapor, acids, sodas, oxygen, Ammonia, ketone Use on hydraulic and pneumatic valves for high temperature-special for nuclear fittings Thicknesses from 0,4 mm up to 2,5 mm Colour black Hardness 70 Shore |
|
Gummed fabrics in Viton + Nylon or Polyester Temperature of use -25°C + 120°C Good in petrol, alcohol petrol, peroxides, waste gas, oils, gas, acids, colour black Regulators gasoline, carburettors, valves for chemical agents Thicknesses from 0,18 mm up to mm 1,50 Hardness 80 Shore |
|
Gummed fabrics in Viton+insert Poliarillamide Temperature of use: -25°C + 200°C Good in petrol, alcohol petrol ,peroxides, waste gases Oils ,gas ,acids , Valves for aggressive substances at high temperatures, egr valves Thicknesses from 0,30 mm up to 1,50 mm Hardness 80 Shore |
|
Gummed fabrics in Epicloridrina + insert Nylon or Polyester Great flexibility to low temperatures Temperature -40°C +120°C Good with petrol,propane,butane,methane,pentane,oils Valves and regulators where cold resistance is required, gas and petrol Thicknesses from 0,28 mm up to 1,50 mm Hardness 80 Shore |
|
Gummed fabrics in Fluorosilicone + insert Poliarillamide Great resistance to high and low temperatures, Great chemical resistance Temperature - 60°C+200°C Good in petrol, waste gas, EGR Valves Thicknesses 0,40 mm Hardness 60 Shore |
|
Gummed fabrics in NBR + insert Nylon |
|
Temperature of use -35°C+100°C |
|
Materials very soft good for use of gas regulators. |
|
Good in methane,propane,butane,pentane,other gases Valves for gas with resistance to low temperatures |
|
Thicknesses from 0,40 mm up to 2 mm Hardness 50 Shore |
|
Gummed Fabrics in NBR + insert in Nylon or Viscose |
|
Optimal relation quality-price |
|
Temperature of use -35°C + 100°C |
|
Good with petrol, oils, gas regulators and valves, resistance to air and petrol |
|
Thicknesses from 0,20 mm up to 2,5 mm Hardness 70 Shore |
|
Gummed Fabrics in NBR with insert in Nylon or Viscose |
|
Rubber with high caracteristics of resistance to hydrocarbons |
|
Temperature of use -30°C +100°C |
|
Good with petrol, diesel, oils, propane,butane,methane, pentane, petol and diesel pumps. |
|
Thicknesses from 0,28 mm up to 3 mm Hardness 70 Shore |
|
Gummed Fabrics NBR with different spreads on two sides |
|
on one side rubber 745N, nitrile resistant to fuels on the other side rubber 709N resistant to oils |
|
Temperature -30°C+100°C Colour green/red |
|
Use for petrol pumps and filters. Optimal caracteristics |
|
Thicknesses from 0,68 mm up to 1,10 mm Hardness 50 Shore |
|
Gummed Fabrics NBR + insert in Nylon |
|
Temperature -35°C +100°C |
|
Good with petrol, methane,propane,butane,pentane |
|
Petrol pumps, carburettors |
|
Thicknesses from 0,18 mm up to 0,28 mm Hardeness 70 shore |