Suitable for the construction of manufactured dimensionally stable, heat resistant, self, mostly in place of metals.
Watt Density ':
From 1.06 to 1.10 g/cm3
Structure: amorphous thermoplastic material - Absorption of water very low
Mechanical characteristics:
Duro, rigid, impact-resistant (even at low temperatures).
Very dimensionally stable, high resistance to nick.
The base material can be modified to be able to predefine the mechanical characteristics desired in correspondence to specific uses.
Electrical characteristics:
Electrical Insulation very good
Good dielectric characteristics (virtually independent of frequency)
Very resistant to current creeping
Thermal characteristics:
Temperature resistance excellent; high dimensional thermal resistance, good stability, very low thermal expansion.
Temperature use from -40 to +120 ° C (for a short time even higher).
Autoestinguente without dripping
Resistant to:
Diluted mineral acids, alkaline solutions, alcohol, fats and oils second additives.
Resistant to hot water and cold water
Good resistance to ageing
Not resistant to:
Aromatic hydrocarbons, chlorinated hydrocarbons, gasoline, oils and fats second additives.